Parts Identification; Technical Specification - Sinbo SHB 3089 Manual De Instrucciones

ENGLISH
SINBO SHB 3089 BLENDER WITH GRINDER AND MINCER
INSTRUCTION MANUAL

PARTS IDENTIFICATION

A. Filler Cap
B. Lid
C. Pouring Spout
D. Blender Jug
E. Blender Body
F. Control Knob

TECHNICAL SPECIFICATION

Model: SHB 3089
Voltage: AC230V, 50Hz
Rated power: 400W
Blender jar capacity: 1.5L
Feature list
1. 2 speeds with pulse
2. Unique blender jar design for efficiency blending performance and easy pouring
3. Removable parts are dishwasher-safe
4. 1.5L plastic jar with feeding cup
5. Anti Slip feet
Intended Use
Your blender has been designed for blending, mixing and crushing of solid and liquid food and beverage
ingredients. This product is intended for indoor household use only.
Read this entire manual carefully before using the appliance.
Safety Instructions
• Warning! When using mains-powered appliances, basic safety precautions, including the following,
should always be followed to reduce the risk of fire, electric shock and personal injury.
• The intended use is described in this manual. The use of any accessory or attachment or the
performance of any operation with this appliance other than those recommended in this instruction
manual may present a risk of personal injury.
• Retain this manual for future reference.
Using your appliance
• Always take care when using the appliance.
• Never pull the power supply cord to disconnect the plug from the socket. Keep the power supply cord
away from heat, oil and sharp edges.
• Do not place the appliance on or near heat sources or in a heated oven.
• Do not use the appliance outdoors.
• Always protect the motor unit from water or excessive humidity.
• if the power supply cord is damaged during use disconnect the appliance from the power supply
immediately .Do not touch the power supply cord before disconnecting from the power supply.
• Disconnect the appliance from the power supply when not in use before fitting or removing parts and
before cleaning.
• Never let the appliance operate unattended
• Never reach into the jar with your fingers or an object while the appliance is running.
• Only remove the jar after you have switched the appliance off and any moving parts have stopped.
• Do not touch the cutting blades.
- 6 -