Sauder 422032 Manual Del Usuario página 37

Step 32
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert the METAL PINS into the hole locations of your choice
å
in the LEFT END (B) and LEFT UPRIGHT (E). Set the ADJUSTABLE SHELF (L) onto the METAL PINS.
To insert the drawer into your unit, tip the front of the drawer down and drop the rollers on the drawer behind the rollers on
å
the unit. Lift the front of the drawer up and slide it into the unit. Repeat this step to insert the PENCIL DRAWER.
To insert the fi le drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the
å
unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way in,
then it will slide in and out easier.
Insert the GROMMET (10P) and GROMMET CAP (1P) into the large hole in the TOP (C).
å
Using your hammer, gently tap a CAM COVER (12P) onto each visible HIDDEN CAM
å
on the LEFT END (B) and LEFT UPRIGHT (E).
25 lbs.
L
40 lbs.
1R
(4 used)
2R
(4 used)
To cover HIDDEN CAMS
10 lbs.
B
E
12P
C
70 lbs.
15 lbs.
25 lbs.
1P
10P
Page 37