Black 9/16" Flat Head Screw - Sauder 422032 Manual Del Usuario

Step 24
1
D427
D517
Groove
Fasten the PENCIL DRAWER BOX FRONT (D517) to the
å
PENCIL DRAWER SIDES (D427 and D428). Use two
BLACK 1-9/16" FLAT HEAD SCREWS (30S).
3
Be sure the PENCIL
DRAWER BOTTOM
inserts into the PENCIL
DRAWER BACK groove.
Fasten the PENCIL DRAWER BACK (D516) to the PENCIL DRAWER SIDES (D427 and D428). Use two BLACK 1-9/16"
å
FLAT HEAD SCREWS (30S).
NOTE: Be sure the PENCIL DRAWER BOTTOM (B44) inserts into the groove of the PENCIL DRAWER BACK (D516).
å
30S
BLACK 1-9/16" FLAT HEAD SCREW
(2 used in this step)
D516
D427
B44
2
D427
D428
Be sure the PENCIL
DRAWER BOTTOM inserts
into the PENCIL DRAWER
BOX FRONT groove.
Slide the PENCIL DRAWER BOTTOM (B44) into
å
the grooves in the PENCIL DRAWER SIDES (D427
and D428) and PENCIL DRAWER BOX FRONT (D517).
D428
B44
U n fi
n i s h
e d
s u r
f a c
e
D517
30S
BLACK 1-9/16" FLAT HEAD SCREW
(2 used in this step)
With the palm of
your hand, tap the
PENCIL DRAWER
BOTTOM down
into the groove.
D428
Page 29