NORAUTO DAB-010LF Instrucciones De Uso página 17

• How to use:
1. Take out of the Micro USB charging cable, one jack is connected
with our DAB, another jack is connected with your car charger DC 5V
output.
2. Connect the unit to car audio system (there are 2 ways to connect)
- Audio output
In order to get better sound effects, please use 3.5mm audio cable to
connect LINE OUT jack of the device and AUX IN jack of your car, then
select AUX IN as audio source to play DAB/DAB+ audio source directly.
Notice: For a better sound quality, if your car has an AUX input, we always
recommend you to use the AUX cable to connect.
- FM transmitting
You can also connect to car audio system wirelessly via FM transmitting.
Short press M button to enter frequency adjustment, then rotate M button
to adjust the frequencies within 87.6-107.9MHz, then press M button to
confirm the selected frequency, make sure the frequency is same as your
car radio frequency. ( In order to get better sound performance, please
select empty or weak frequency on car radio as possible)
Notice:When AUX cable is plugged in, FM is disconnected
3. Listen to DAB radio station
- Long press M button to scan all the available DAB/DAB+ stations, after
3 seconds, it will play the first station automatically.
- Rotate M button to adjust DAB/DAB+ stations, left-rotate enter the
previous station, right-rotate enter the next station.
• Cautions:
To reduce the risk of electric shock, do not remove any cover. No user
serviceable parts inside, refer any servicing to qualified service personnel.
16