Important Safeguards; Before Using For The First Time - Russell Hobbs 18272-56 Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Read the instructions and keep them safe. If you pass the appliance on, pass on the instructions
too. Remove all packaging, but keep it till you know the appliance works.

important safeguards

Follow basic safety precautions, including:
1 This appliance must only be used by a responsible adult. Use and store the appliance out of
reach of children.
2 Don't put the motor unit in liquid, don't use the appliance in a bathroom, near
water, or outdoors.
3 Don't open the appliance till the blades have stopped moving.
4 Take great care when handling the blade unit.
5 The motor won't operate unless the appliance has been properly assembled. This
is a safety feature – don't try to overcome it.
6 Unplug before dismantling or cleaning.
7 Route the cable so it doesn't overhang, and can't be tripped over or caught.
8 Don't leave the appliance unattended while plugged in.
9 Don't fill with anything hotter than you can comfortably handle (i.e. liquid temperature
below 40°C).
10 Don't try to chip ice, don't try to chop raw meat, and take great care with the blades.
11 Don't run the motor for more than 1 minute at a time, then leave it for a minute to cool down
before using it again.
12 Don't fit an attachment or accessory other than those we supply.
13 Don't use the appliance for any purpose other than those described in these instructions.
14 Keep the appliance and the cable away from hotplates, hobs or burners.
15 Don't operate the appliance if it's damaged or malfunctions.
16 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.

before using for the first time

Turn to "care & maintenance" on page 67, and clean the appliance and attachments thoroughly,
to remove manufacturing dust, etc.
processing
1 Unplug the appliance.
2 Lift the motor unit off the bowl.
3 Turn the lid anti-clockwise to unlock it, and lift it off the bowl.
4 Hold the blade unit by the plastic part.
5 Lower the blade unit over the spindle in the bottom of the bowl.
6 You may have to turn it slightly, to fit over the flanges on the spindle.
7 It's spring-loaded, so you'll feel some resistance as you push it down.
8 Put the food in the bowl.
a) don't try to chip ice, don't try to chop raw meat, and take great care with the blades
b) don't fill above the 500ml mark on the bowl
c) don't process large amounts in batches – if you need to process large amounts, you need
a large processor
d) don't process hard foods – i.e. anything you can't cut easily with a kitchen knife
e) don't chop big bits – maximum 18mm cubes
9 Align the tabs on the edge of the lid with the slots in the top of the bowl.
10 Lower the lid on to the bowl, and turn the lid clockwise to lock it shut.
11 Lower the motor unit on to the lid.
12 You may have to turn it slightly, to engage the top of the blade unit.
household use only
66

Publicidad

Tabla de contenido
loading

Tabla de contenido