Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been supervised/
instructed and understand the hazards involved.
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
To avoid injury, take care handling the blades, emptying the jug, and cleaning.
Misuse of the appliance may cause injury.
h The surfaces of the appliance will get hot.
Take care when adding hot liquid, as it may be ejected due to sudden steaming.
Don't immerse the jug or the motor unit liquid.
Unplug the appliance before assembly, disassembly, or cleaning.
Don't leave the appliance unattended while plugged in.
If you overfill, boiling liquids may be ejected.
Use the jug only with the motor unit supplied (and vice versa).
Ensure the appliance is in standby mode before removing the jug.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
•
Don't use accessories or attachments other than those we supply.
•
Don't use the appliance for any purpose other than those described in these instructions.
•
Don't operate the appliance if it's damaged or malfunctions.
DIAGRAMS
1.
cup
2.
lid
3.
lid lock
4.
jug lock
HOW IT WORKS
•
Put the ingredients into the jug.
•
Choose a program.
•
Come back in half an hour (soup)/ an hour (sauce), adjust the seasoning, and eat.
•
As it's a combination of a blender and a heater, you can also use it to blend, to make smoothies, to
crush ice, and even boil potatoes.
ASSEMBLY
IMPORTANT: If either the lid or jug is incorrectly fitted the unit will not work.
1.
Fit the jug on top of the motor unit, and press down, till it clicks into place (it will only fit one way).
2.
To fit the lid, hook the front of the lid over the jug spout (Fig. A).
3.
Lower the lid and press down on the back of the lid until the lid lock clicks outwards (fig. B).
4.
Fit the cup into the hole in the lid. The cup is marked at 30ml and 60ml. Filled to the rim, it holds
130ml.
DISASSEMBLY
1.
Lift the cup out of the lid.
2.
Press the lid lock, and lift the lid off the jug.
3.
Squeeze the jug lock into the handle, and lift the jug off the motor unit.
HOUSEHOLD USE ONLY
5.
jug
6.
handle
7.
motor unit
3
Publicidad
Tabla de contenido
