Operation And Functions - Klarstein DRYFY 10 Manual De Instrucciones

Keys and Functions
Timer: 24 hours timing, press the key, to set the timing off or timing on, timing
range is from 1 to 24hours, it will increase 1hour by each press. Press the key
again, timing can be canceled.
Internal drying function: press the key to start the inside drying function. The
drying function prevents molding from forming inside the dehumidifier.
Fan: In Auto dehumidifying and cloth dry mode, press this button to change
fan speed, high-low-high.
Display screen: In Auto dehumidifying or cloth dry mode, it will indicate the
actual room humidity. In timing mode, it indicates the setting time.
Humidity: In auto dehumidify mode, press the button repeatedly to set
humidity from 80 % to 30 % in 5 % increments.
Mode: When power on or timing power on, press this button to choose auto
dehumidifying or continuous dehumidifying (dry cloth function). The lights will
flash when choose the modes.
On/Off: Press the key to turn on/turn off the unit.

OPERATION AND FUNCTIONS

Timing off
When the dehumidifier is running, press "TIMER" to start the function, then press
"TIMER" button to set hours, timing range is from 1 to 24hours, it will increase 1 hour by
each press. When time is up to your setting, unit will turn off. After setting, timer button
flashes 5 time for confirmation.
Timing on
When the dehumidifier is in standby state, press "TIMER " to start the function, then
press "TIMER" button to set hours, When time is up to your setting, unit will turn on. After
setting, timer button flashes 5 time for confirmation.
EN
17