Useful Advice; Use - Imetec MULTISTYLER Instrucciones De Uso

For the appliance features, refer to the external packaging.
To be used only with the accessories supplied.
• Understanding usage technique of the styler requires small initial expedients that will allow
quickly obtaining the desired effects. The time of use is variable based on experience using
the appliance and the desired hairstyle.
• Ensure the hair is dry, clean and without any trace of hairspray, hair mousse or gel.
• Comb the hair ensuring there are no knots.
• Start straightening from the nape of the neck, proceed on the sides and finish on the forehead.
• During use, the heating and cooling of the styler, position the appliance on a smooth and
heat resistant surface.
• While straightening, be careful not to near the brush too much to the sensitive parts of the
face, ears, neck or head.
• Let the appliance cool down completely when finished using before putting it away.
PREPARING THE HAIR
• Wash hair as normal and comb removing knots.
• Dry the hair and brush from the roots to the ends.
OPERATION
Depending on the desired effect, choose whether to use the multistyler with the following
accessories:
• Smooth plates, for a straight effect (9).
• Narrow, medium or wide curling tongs for a curly effect (15, 16, 17).
• Narrow curling tongs and removable brush for a wavy effect (13, 17).
• Medium curling tongs and spiral accessory for sculpted ringlets (14, 16).
• Frisé irons for a frizzy effect (10).
USER INSTRUCTIONS
• Slide the accessory on the heating element (1) ensuring the lever of the
curling tongs or straightener is facing upwards.
• Turn the locking ring (2) clockwise until its arrow (2) is aligned with the
arrow on the hand grip (4).
• Connect the power cable (6) to the mains.
• Move the button 0-1 (5) onto position 1 and let the appliance heat up.
• Proceed with styling.
• When styling is completed, move the 0-1 button (5) onto position 0 and
unplug the appliance from the socket.
• Wait for the heating element (1) to cool down and remove accessories.
ATTENTION! Risk of scalding.
• To extract the accessories, turn the locking ring (2) counterclockwise until it clicks and pull out
the accessory from the heating element (1).
Straight effect
• Insert the smooth straighteners (9) into the straightener support (8) until you hear a click.
• Insert the straighteners support (8) onto the heating element (1).
• Take a thin lock of hair, not too full and as wide as the straightener and insert it between the
two straighteners. Keep the lock of hair taut with one hand while using the other to slide the
closed straighteners from the roots to the ends.
Wavy effect
• Insert the narrow curling tong (17) onto the heating element (1) keeping the supporting hook
downwards, then insert the brush (13) onto the accessory with the closing hook downwards
until you can hear it click.
• Take a thin lock of hair and wrap it around the brush (13), paying attention not to wrap it more
than twice.
• Let go of the hair after a few seconds.
• Style the wave you have obtained with your hands.
Curly effect
• Insert one of the three available curling tongs (15, 16, 17) onto the heating element (1)
keeping the supporting hook downwards.
• Take a thin lock of hair between your fingers; the thinner the lock, the tighter the curls.
• Open the curling tong lever and completely wrap the lock of hair onto the cylinder, then close
the lever.
• Wait a few seconds for the lock of hair to acquire the desired style, then release it from the
iron by opening the lever.

USEFUL ADVICE

USE

7