Cleaning; Storing And Caring For The Product; Disposal; Assistance And Warranty - Imetec MULTISTYLER Instrucciones De Uso

• Finish off the style of the curl with your hands.
Sculpted ringlets
• Insert the medium curling tong (16) onto the heating element (1) keeping the
supporting hook downwards, then insert the spiral accessory (14).
• Take a lock of hair, open the lever of the curling tong and lock the end of the lock of
hair between the cylinder and the lever.
• Wrap the lock of hair around the spiral by rotating the multistyler.
• Open the lever after a few seconds and release the lock of hair by unwinding it from
the spiral.
• Style the ringlet you have obtained with your hands.
Frisé effect
• Insert the frisé effect irons (10) into the iron support (8) and ensure the upper and
lower part suitably match.
• Insert the straighteners support (8) onto the heating element (1).
• Take a thin lock of hair, as wide as the plate and not too full, and place it between
the two plates.
• Press slightly.
• Move the styling plate down, taking care not to overlap already styled hair.
• Repeat the procedure for the entire length of the lock of hair.
• Switch off the appliance by moving the 0-1 button (5) onto position 0 and unplug the
appliance from the socket.
• Wait for the accessories to be cold and pull them out of the heating element (1).
• Clean the surface of the accessories and the handle (4) with a soft, damp cloth.
IMPORTANT ! Make sure all cleaned parts are completely dry before reusing
the appliance.

STORING AND CARING FOR THE PRODUCT

ATTENTION! Once you have finished using the hair straightener, make sure it
has cooled down completely before putting it away. Never wrap the power
supply cord (6) around the appliance.
The product is packaged in recyclable materials.
Dispose of these in an appropriate environmentally friendly manner.
Pursuant to European Standard 2002/96/EC, the appliance must be disposed of at the
end of its life span in a compliant manner. This regards recycling useful substances in the
appliance, which reduces the environmental impact. For further information, contact the
local disposal body or the appliance dealer.
To request repairs or purchase spare parts, please contact IMETEC's authorised customer
service centre on the Number below or via the website.
The appliance is covered by the manufacturer's warranty. For details, read the attached warranty
sheet.
Failure to comply with the instructions for use and maintenance provided in this manual will
render the manufacturer's warranty null and void.
MANUEL D'INSTRUCTIONS POUR L'UTILISATION DU FER à BOUCLER MULTISTyLER
Cher client, IMETEC vous remercie d'avoir choisi ce produit.
ATTENTION ! Instructions et mises en garde pour
une utilisation sûre
Avant d'utiliser l'appareil, veuillez lire attentivement
les instructions d'utilisation et, en particulier, les
avertissements concernant la sécurité et les respecter.
Conservez ce manuel ainsi que le guide illustré s'y

CLEANING

DISPOSAL

ASSISTANCE AND WARRANTy

FRANçAIS
8