Password Setting - Avtech KPD Serie Manual De Instrucciones

3.5 Password Setting

Press and enter the password to go to the quick-start menu list. And then move to "ADVANCE" to enter the
advanced setting menu.
In the "ADVANCE" menu, move to "
submenu to set the password (four digits). The default admin password is 0000.
SERIAL TYPE
BAUD RATE
HOST ID
PASSWORD
RESET DEFAULT
CLEAR HDD
UPGRADE
AUTO KEYLOCK (SEC)
LANGUAGE
VIDEO FORMAT
VERSION
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTINGS
SELECT BACK
4. BASIC OPERATION (Take 16CH DVR as an example)
4.1 Live Page
In this live page of the DVR, you can see the live viewing of 1- / 4- / 9- / 16-cut screen.
Icon Function
Key lock
rd
3 live audio
channel
rd
3 playback audio
channel
Digital zoom
unselected
Alarm
4.2 Recording
When the recording and the pre-alarm function are activated, this device will overwrite 8GB data from the oldest
for continuous recording without notice.
1) Continuous Recording Icon
When the DVR is properly connected with camera, you can see the icon "
2) Event Recording Icon
When the motion / alarm detection is activated, once motion or external alarm happens, you will see the icon
" " (motion) or "
SYSTEM INFO ". Select "PASSWORD" and press
SYSTEM INFO
NEXT ENTER
Icon Function
Key unlock
th
4 live audio
channel
th
4 playback audio
channel
Timer recording
HDD overwrite
(Selected Model Only)
" (external alarm) on the screen.
HDD-MASTER-1
ENGLISH
1248-1012-1035-1018-M1-6C1B
Icon Function
st
1 live audio
channel
st
1 playback audio
channel
Audio channel
unselected
Motion
7-
to enter the
RS485
2400
0
XXXX
RESET
START
30
NTSC
Icon Function
nd
2 live audio
channel
nd
2 playback audio
channel
Digital zoom mode
Recording
" (recording) on the screen.