7 - EMERGENCY OVERRIDE
The emergency override can happen in two different ways:
- the first way is made turning ON the ignition key and in this way it happenes immediately (transponder detecting);
- the second way happens through the control panel and to proceed with this way follow the instructions listed below.
Press the push button placed on the control panel a number of times corrisponding to the first digit of your PIN CODE.
The LED will blink everytime you press the button, a longer blink will confirm that the right PIN CODE digit has been input. Proceed
in the same way with the 3 further digits.
The system will disarm as soon as the last digit is input.
GLOBE 4800/4900 CAN
7 - EMERGENCY OVERRIDE
06DE2177B.pmd
Push for a number of times
correspondent to the digit of
your PIN code
quick
flashing
19
long
flashing
28/05/2007, 10.33
GB
19