ESYLUX PD-C360i/24 DUODIMplus-FM Manual Del Usuario página 20

Offset setting light channel C2
Light value for channel C2 is 50 % less than C1.
GB
Offset setting light channel C2
Light value for channel C2 is 40 % less than C1.
Offset setting light channel C2
Light value for channel C2 is 30 % less than C1.
Offset setting light channel C2
Light value for channel C2 is 20 % less than C1.
Offset setting light channel C2
Light value for channel C2 is 10 % less than C1.
Offset setting light channel C2
Light value for channel C2 is the same as C1.
20
Change between fully automatic and semi-automatic mode
light channel C1 + C2
Semi­automatic mode, blue LED turns off for approx. 2
seconds. Fully­automatic mode, blue LED flashes 3 times.
Change between fully automatic and semi-automatic mode
HVAC channel C3
Semi-automatic mode ECO light channel C1 + C2
Press button "C1" and then "A/M" (regardless of the
original default values). Then press the "100 Lux"
button within 2 seconds. Green LED flashes once.
Semi-automatic mode corridor light channel C1 + C2
Press button "C1" and then "A/M" (regardless of the
original default values). Then press the "200 Lux"
button within 2 seconds. Red LED flashes once.
Switching LEDs ON/OFF (red/green LED)
Switch LEDs off = press button,
blue LED turns off for approx. 2 seconds.
Switch LEDs on = press button,
blue LED flashes 3 times
Reinstating factory settings
Confirmed by blue and red LED on the detector briefly
flashing alternately.