EnGLIsh
HEAVY-DUTY ROTARY HAMMERDRILL
D25614
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Type
No-load speed
No-load beats per minute
Power input
Single impact energy (EPTA 05/2009)
Optimum drilling range into concrete
Maximum drilling range in concrete
Maximum core drilling range in concrete
Tool holdler
Weight
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-6:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Drilling
Vibration emission value a
=
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
=
h ,Cheq
Uncertainty K =
* Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
18
WALT one of the
e
EC-Declaration of Conformity
D25614
V
230
Machinery Directive
AC
V
230/115
AC
1
min
-1
190–380
Heavy-Duty Rotary Hammerdrill
bpm
1450–2900
D25614
W
1350
J
10.5
D
WALT declares that these products described under
e
Technical Data are in compliance with:
mm
16–32
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
mm
45
These products also comply with Directive 2014/30/EU and
mm
125
2011/65/EU. For more information, please contact D
SDS MAX
the following address or refer to the back of the manual.
kg
7.8
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
dB(A)
93
dB(A)
104
Markus Rompel
dB(A)
3
Vice-President Engineering, PTE-Europe
D
WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
m/s²
8.9*
01.10.2019
m/s²
1.5
m/s²
9.0*
Definitions: Safety Guidelines
m/s²
1.5
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
WALT at
e
WALT.
e