Dash Disassembly - Metra 99-6535B Instrucciones De Instalación

1. Open upper storage compartment
on passenger side. (Figure A)
2. Unclip, unplug, and remove painted
hazard button panel below the radio.
(Figure A)
3. Unscrew (2) T-25 Torx screws at the
bottom of the radio trim. (Figure B)
4. Unclip the radio trim. (Figure B)
5. Unscrew (4) T-25 Torx screws
securing the radio into the dash.
(Figure C)
6. Unplug and remove the radio from
the dash. (Figure C)
7. Cut the shaded areas in the dash
cavity to gain suitable depth for the
new radio chassis (CAUTION: The
vents are located directly behind the
area to be cut, use extreme caution
to not cut into them). Be careful, you
may want to make multiple cuts.
(Figures D, E)
Continue to Kit Assembly

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
99-6535B
First cut
(Figure D)
Second cut
Remove shaded area
(Figure E)
2
Be careful not to cut
into the vents!
Remove shaded area