Kit Assembly - Metra 99-6535B Instrucciones De Instalación

ISO DIN radio provision
1. Attach the pocket to the radio
brackets using the (4) supplied
#8 x 3/8" Phillips screws. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the completed
assembly, and secure it using
screws supplied with the radio.
(Figure B)
4. Insert the radio trim panel into the
factory radio trim removed in step
4 of dash disassembly. (Figure C)

Kit Assembly

(Figure A)
(Figure B)
99-6535B
5. Locate the factory wiring harness
and antenna connector in the
dash, complete all necessary
connections to the radio and test
the radio for proper operation.
Metra recommends using the
proper mating adapter from
Metra and/or AXXESS.
6. Mount the radio into the dash
using the factory hardware.
7. Reassemble the dash in the
reverse order of disassembly.
3
(Figure C)