Helpful Hints - Weston 33-1301-W Manual De Instrucciones

HELPFUL HINTS

. .
Any time that you change the Grinding Plates, the Head should be
removed COMPLETELY to prevent pushing meat back into the Motor Drive
Shaft Housing.
. . To prevent overheating, do not operate the Grinder for more than 5 minutes
at a time. Allow the Grinder to cool periodically.
. . DO NOT over-tighten the Front Ring Nut. It should be firmly tight.
. . Make sure the Grinding Knife blades lay flat on the Grinder Plate.
. . DO NOT operate the Grinder without meat in the Head. Running the
Grinder while dry could damage the Head and Auger.
. . Always lubricate the Head, Grinding Plate and Grinding Knife with a food-
grade silicone spray after cleaning.
. . DO NOT grind bones or other hard objects.
14