Disassembly And Dismantling; Waste Disposal; Residual Risks; Maintenance - Master Trimmers MT Gentle 50 Manual De Uso Y Mantenimiento

Disassembly and dismantling

+
Before proceeding with disassembly, all possible power and/or power sources must be disconnected.
Waste must be disposed of according to the corresponding national regulations.
+
For disassembly and dismantling operations, use the following personal protective equipment: gloves and
protective glasses.
+
Covers, flexible ducts and components made of plastic material (or any non-metallic material) must be
disassembled and disposed of separately.
+
Hydraulic and electrical components (such as valves, solenoid valves, etc.) must be disassembled for reuse if
they are in good condition or, if possible, checked and recycled.
+
Take the components to an authorized recycling centre so that they are recycled and/or disposed of in an
environmentally safe way. Recycle unwanted materials instead of disposing of them.

Waste disposal

Waste must be disposed of according to the corresponding national regulations.

Residual risks

Incorrect use of the machine:
Reason
Look at the machine
Crushing explosive
materials

Maintenance

Putting fingers
through the grid
Removing the safety
devices or protective
sheets
36
Danger
Danger of material
expelled
Fire and explosion
hazard
Hand can get caught in
the blades
The blade may catch
clothing or fingers
The mobile parts can
catch clothing, can
injure members or lead
to amputations
www.masterproducts.es
Remaining risk
Possible injuries to the
face and eyes
Any danger of burn
wounds
Danger of serious injury
or amputation
Danger of serious injury
or amputation
Danger of serious injury
or amputation
Precaution
See 3.4 of the
instructions manual
Only use the suggested
material
Disconnect the machine
from the power supply
See 3.4 of the
instructions manual
You may not remove
the protective elements
and safety devices