Inserting Battery - LaserLiner ThermoSpot Pocket Manual Del Usuario

Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limit values in accordance with
EMC-Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft,
petrol stations or in the vicinity of people with pacemakers –
may apply. Electronic devices can potentially cause hazards or
interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close to
high voltages or high electromagnetic alternating fields.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning
agents, scouring agents and solvents. Remove the battery(ies) before
storing for longer periods. Store the device in a clean and dry place.
Calibration
The meter needs to be calibrated and tested on a regular basis to
ensure it produces accurate measurement results. We recommend
carrying out calibration once a year.
1

Inserting battery

Open the battery compartment and insert battery according
to the symbols. Be sure to pay attention to polarity.
2
ON/OFF
ThermoSpot Pocket
The device switches off
automatically after 30 seconds.
Press the button again to switch
the device back on.
ON
07
EN