Attaching The Light-Blocking Shield - Pioneer KURO KRP-TS01 Manual De Instrucciones

Attaching the Light-blocking Shield

Conduct after attaching the Pioneer television
onto the stand.
This part prevents reflection of the cables connected to the
back of the Pioneer television on the base cover.
Attach it after anchoring the base cover on a flat stable place.
1
En
In case of PDP-LX6090 / PDP-LX6090H /
PDP-LX609A / PRO-141FD
(with side speakers installed)
Attachment Procedure
Peel off one side of the double-stick tape on the
light-blocking shield and attach the light-blocking
shield onto the base cover.
• Be careful that the light-blocking shield does not catch on
the pipe insertion holes.
• Anchor it in place so that there are no gaps. If there is a gap,
the light-blocking shield may peel off.