Roadstar RCR-4950US Manual De Instrucciones página 5

clean compact discs. These chemicals can irreparably damage the disc's surface.
• Discs should be returned to their cases after use. This avoids serious scratches that
could cause the Laser pickup to skip.
• Do not expose discs to direct sunlight, high humidity, or high temperatures for extended
periods. Long exposure to high temperatures can warp the disc.
• Do not stick paper or write anything with a ballpoint pen on the label side of the disc.
CD/USB/SD -MP3 OPERATION
Loading and Unloading Compact Discs
1. Set the Function Selector (3) to the CD/MP3 Position.
2. Open the disc compartment's door.
3. When the door has opened, remove a disc from its case and place it carefully in the
compartment with the label side facing up. Locate 3" discs, on the central spindle in the
compartment.
4. Close the door by pressing on the center of the disc compartment door.
PLAY BACK
1. Load a CD into the disc compartment, and close the compartment. The total number of
tracks appears on the display
2. Press the Play/Pause button (22). The disc play will begin from the start of the first track
of the disc.
3. At the end of the disc, the unit will switch to stop mode and the play indicator will go out.
Notes: If the disc is deeply scratched, or too dirty, disc play may not start.
If an improperly centred disc is played, noise can be heard in the mechanism. The
use of such discs should be avoided.
IMPORTANT INFORMATION
This compact disc player has built-in error compensation circuits to correct for minor defects
in a disc. There are limits, however, to the amount of correction available.
In some cases the CD player may skip some tracks on a disc during disc play. This problem
may be caused by defects (such as scratches) on the disc being played, which are too large
for the error compensation circuits to handle.
4. To stop CD play. Press the Stop Button (21). Disc play will stop, the Play indicator will go
off, and the display will show the total number of tracks on the CD.
5. To temporarily stop disc play (pause mode), press the Pause Button (22). Disc play will
stop at the current play position. The Play indication will begin to flash.
6. To resume disc play, press the Play Button again.
English 5 6
Starting disc play from the beginning of a particular track
•
To skip to the next track
1. To skip to the beginning of next track 5 while track 4 is playing.
2. Press the Skip Forward Skip Track Button once to skip to the beginning of next track.
To skip back to the previous track on a disc
1. To skip back to the beginning of current track. Press the skip Backward once.
2
Continuously pressing the Reverse Skip Track Button makes the CD player skip back
through the disc track by track. Once the beginning of the first track is reached, the CD player
will not go back any further.
Manual Search
•
•
RANDOM DISC PLAY (CD/USB/SD)
1. Press the PLAY/PAUSE button (22) and after press the MODE button (29) 3 times to
enter the Random mode. "RANDOM" appears on the display, then press PLAY/PAUSE
button (22) to start playback in Random order.
2. Press SKIP UP button (15) to go to next Random track.
REPEAT DISC PLAY (CD/USB/SD)
For repeat play of one track
English
Press the Forward or Reverse Skip Track Buttons (15/23) to select the desired track.
The number of the selected track will be shown on the CD display. Press the Play/
Pause Button (22) to start play.
Continuously pressing the Forward Skip Track Button until the desired trade is reached.
Once the beginning of the last track is reached the CD player will not advance any
further.
Toskip back to the beginning of previous track.
Press the skip backward Skip Track Button twice.
During playback, pressing the Forward or Reverse Skip / Search buttons will cause the
player to scan through the current track. At the end of a track the player will skip to the
next track and continue scanning. At the beginning of a track the player will skip to the
previous track and continue scanning.
When the player reaches the end of the final track, or the beginning of the first track, it will
stop scanning.