Bass Boost - Roadstar RCR-4950US Manual De Instrucciones

Press the MODE button (29) once. The REPEAT indicator will appear.
Select the desired track by pressing the Forward or Reverse Skip Track buttons (18/27). The
selected track will be shown on the CD display.
Press the Play/Pause button (22).
The selected track will then begin playing through to its end. At which point it will automatically
return to the beginning of that track. This will continue until the Stop button (21) is pressed.
If the MODE button (29) is pressed three times more, the Repeat indicator will go off, Repeat
play will end, and normal disc play will resume from that point.
When the selected track has finished playing, the CD play will Stop.
For repeat disc play of all the tracks on the CD
Press the Stop button (21) first, then press the MODE button (14) twice. The REPEAT ALL
indicator will light up.
Press the Play/Pause button (22).
The disc will then begin playing through to the end of the last track. At which point it will
automatically return to the beginning of the first track. This will continue until the Stop button
(21) is pressed.
If the MODEbutton (29) is pressed once more, the Repeat indicator will be cancelled, repeat
play will end, and normal disc play will resume from that point.
When the last track has finished playing, the CD player will then Stop.
For repeat disc play of all the tracks on the MP3
Press MODE to select the repeat mode when playing MP3 song. During playback, press and
hold MODE for 3 seconds to enable selection of MP3 folders, press Forward or Reverse Skip
Track buttons (18/27) to select the folder, the LCD flockers. Then press MODE to select REP
1 / REP ALL / ALBUM / RANDOM then ress PLAY to srart playback.
Program function
In STOP mode, press PROGRAM and use Forward or Reverse Skip Track buttons (18/27)
to select the track. Repeat until done then press PLAY to start program playback. Up to 99
tracks can be programmed.
CASSETTE OPERATION
INSERTION AND REMOVAL OF CASSETTES
1. Press the Stop/Eject Button (7) to open the Cassette Door.
2. Slip your cassette tape into the holder with the exposed side facing up (the side for
playing faces you).
3 Close the Cassette Doors securely before starting.
English 7 8
PLAYBACK
1. Set the Function Selector (3) to the TAPE position.
2. Insert your cassette tape with the exposed side facing up.
3. Press the Play Key (10) to activate playback.
4. Set the Volume to the desired level.
5
6
HEADPHONE
This unit will accept stereo headphones (not included) with a 3.5mm plug and an impedance
of 8 ohms or greater. The speakers are automatically disconnected when headphones are
connected to the PHONES JACKS (24).

BASS BOOST

This feature reinforces the general Bass (Low frequencies) effect on sound.
Press (27) if desired.
AUX-IN SOCKET
To connect analogue replay devices. Via this socket you can also hear the sound of other
playback devices such as MP3 players, CD players etc. through the loudspeakers.
1. Please connect the external device with 3.5 mm stereo jack plug to the AUX IN socket (27).
2. Turn the function selector switch (23) to the AUX position.
3. Through the loudspeakers you can hear the playback of the sound from the external
device; with the VOLUME control (1) you can change the volume. The CD buttons do not
have any function.
4. For the remaining procedure please see the operating instructions of the external sound
source.
IMPORTANT
Since movement of the CD mechanism and the sensitive circuitry may cause interference
to a radio tuner nearby switch this unit off while operating other radio devices.
English
Press the Pause Key (6) wherever you want to suspend playback. Press Pause key
again to continue play back.
Press the Stop / Eject Key (7) when finished.