Gude SG 120 A Traducción Del Manual Original página 29

SYMBOLS
Caution!
Read the operating instructions
to reduce the risk of injury.
Ground before use
Warning / Caution!
Warning against dangerous voltage
Use a welding mask!
Special welding gloves to be worn at all
times.
Wear safety cut through resistant shoes
with safety sole and steel toe !
Protective apron to be used
Unplug the machine before any work
on it.
Warning against toxic fumes!
The appliance must be stored in a dry place and
protected from frost.
Keep the machine out of reach of children.
Never expose tool to rain.
~ ~
1 1 Single-phase transformer
Flux cored electrode welding
Single-phase alternating current with
rated frequency of 50 Hz
1 - 50Hz
V
Voltage
AC Current
No gas
Wire feeder
Fan
Suitable for welding with an increased
electric risk.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Keep dry at all times.
CE marking
TÜV / GS conformity mark
MAINTENANCE
Machine to be always unplugged before
any adjustment and servicing work on it.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
WARNING The appliance must not be used if da-
maged or safety equipment is defective. Replace any
worn-out and damaged parts.
If necessary, a list of spare parts can be found at www.
guede.com.
If the device is defective, the repair has to be made
exclusively by an authorized customer service..
Use only original accessories and original spare parts.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Use a soft brush to remove the deposited dust from
the ventilation hole and moving parts after each use.
ENGLISH
25