Risk Of Injury - Porter Cable 70-512 Manual Del Usuario

HAZARD

RISK OF INJURY

WHAT COULD HAPPEN
• Tools left unattended, or with
the air hose attached can be
activated by unauthorized
persons leading to their injury
or injury to others.
• Power tools can throw
materials throughout the work
area.
• Power tools can become
activated by accident during
maintenance or tool changes.
• Power tools can cause the
workpiece to move upon
contact leading to injury.
• Loss of control of the tool can
lead to injury to self or others.
• Poor quality, improper, or
damaged tools such as grinding
wheels, chisels, sockets, drills,
etc., can fly apart during
operation, propelling particles
throughout the work area
causing serious injury.
HOW TO PREVENT IT
• Remove air hose when tool is
not in use and store tool in
secure location away from
reach of children.
• Use only parts, fasteners, and
accessories recommended by
the manufacturer.
• Keep work area clean and free
of clutter. Keep children and
others away from work area
during operation of the tool.
• Keep work area well lit.
• Remove air hose to lubricate
or add grinding attachments,
sanding discs, drills, etc. to the
tool.
• Never carry the tool by the
hose.
• Avoid unintentional starting.
Don't carry hooked-up tool
with finger on trigger.
• Repair servicing should be
done only by an authorized
service representative.
• Use clamps or other devices
to prevent movement.
• Never operate tool while under
the influence of drugs or
alcohol.
• Don't overreach. Keep proper
footing and balance at all
times.
• Keep handles dry, clean, and
free from oil and grease.
• Stay alert. Watch what you are
doing. Use common sense. Do
not operate tool when you are
tired.
• Always use tool attachments
rated for the speed of the
power tool.
• Never use tools which have
been dropped, impacted or
damaged by use.
• Use only impact grade sock-
ets on an impact wrench.
• Do not apply excessive force
to the tool – let the tool
perform the work.