Installation Instructions - Reelcraft SGA3650 OLP Instrucciones De Operacion Y Lista De Partes

Series S
Operating Instructions and Parts List
Safety Precautions
List of explanation symbols
Means warning! Watch out! There are
possible hazards with this procedure!
Possible hazards are shown by this
warning symbol.
Means warning moving parts keep
away from moving parts and pinch
points.
Means consult the service center
or become trained and read the
service manual.
Means warning item under
tension, this area contains a
tensioned spring.
Means warning! Do not remove
fasteners or attempt to service
without contacting a service center
or becoming fully trained on the
service and repair of hose reels.
Means warning! Never let the hose or
cable rewind uncontrolled.
Means all positional locking system
Means ensure you have full
knowledge of the service or repair
task being carried out possible
hazards.
Note: Please refer to your local
authority for rules and regulations on
the safe use of compressed liquids,
gases and fuel gases. Two year
limited warranty
2
Reelcraft Industries, Inc. • 800-444-3134 or 260-248-8188 • Fax: 260-248-2605
Two year limited warranty
All products manufactured by Reelcraft
Industries, Inc. are warranted to be free of
defects due to faulty material or
workmanship for 24 months from date of
shipment, except hose. Normal wear and
tear is not considered a defect in material
or workmanship.
Reelcraft's liability shall be limited to repair
or replacement of defective material during
the warranty period and will be at
Reelcraft's discretion when returned prepaid
to its plant or authorized service depot.
The warranty does not cover damage
caused by accident, abuse, neglect or
improper installation.
Reelcraft products must be installed,
maintained and operated in accordance to
the recommendation of Reelcraft and the
manual of instructions. Failure to use
circuit breakers on electric motors, filter,
lubricators on air motors and flexible inlet
connections on live hose reels will void
warranty.
Equipment, products, components and
hoses not manufactured by Reelcraft a
subject to the original manufacturer's
guarantee and warranties. Hoses carry a
6-month warranty as listed by the
manufacturer. Reelcraft will assist in
filing claims, but does not have any
additional responsibility if original
manufacturer denies warranty claim.
reelcraft@reelcraft.com • www.reelcraft.com
SGA3650 OLP
SGA3665 OLP
SGA3850 OLP
Products built to customer specifications
and requirements or products incorporating
variation from catalogued items are
considered special and are not subject to
cancellation or returnable for credit under
any circumstances.
Reelcraft reserves the right to modify or
alter product, dimensions, design and
construction to improve performance.

Installation instructions

Connection of the inlet (supply) hose/s
A flexible connection between the reel and
the source of supply is required to prevent
possible misalignment and binding.
Non-flexible connections will void the
warranty. The pressure rating of the inlet
hose must be equal to or greater than the
rating of the reel.
Using the appropriate approved hose and
fittings connect the supply line to the inlet
connection of the reel.
Ensure you use thread sealants where
applicable and permitted.
Never over-tighten or under-tighten
fittings.
Once connection has been made to the inlet
of the reel ensure you make or fit a
connection to the outlet of the reel (the
main hose) then turn the supply valve on
slowly and check for leaks.
Note: Please refer to your local authority
for rules and regulations on the safe use of
compressed liquids, gases and fuel gases.
SWA3850 OLP
SHA3850 OLP
SCA3850 OLP