Installation Instructions - Reelcraft D80000 OLS Serie Manual De Instrucciones De Operación Y Lista De Partes

INSTALLATION INSTRUCTIONS

Unless reel was specified differently when ordering,
maximum installation height is 16 feet.
this distance.
Ensure that supply line pressure does not exceed
maximum working pressure rating of reel. Apply pipe thread
sealant to all threads on standard reels.
DO NOT OVERTIGHTEN CONNECTION.
Recommended torque not to exceed 70 ft. lb.
Use flexible hose connection at input.
Do not use rigid plumbing. The use of
rigid plumbing may void warranty.
Use extreme caution; reel under tension.
Avoid releasing latch mechanism.
Apply pipe thread sealant to all threads on standard reels.
DO NOT OVERTIGHTEN CONNECTION.
Recommended torque not to exceed 70 ft. lb.
Do not exceed
ADJUSTMENTS
to achieve the desired tension without exceeding the winding
mechanism’s spring capacity. Properly tensioned reels allow
all hose to be freely removed from the spool until the point of
U-bolt contact.
Damage to the winding mechanism will result if spring is
over-tensioned.
SERVICE INSTRUCTIONS
system before performing the following procedures.
hose reel. Do not attempt to open the riveted spring case
assembly.
SERIES D80000 OLS
HOSE REELS
Use extreme caution; reel under tension.
Avoid releasing latch mechanism.
When adding wraps of hose, add just enough wraps
Rewind hose on reel, then bleed pressure from
Remove all spring tension before disassembling the
3