GreenWorks 32037a Manual De Utilización página 7

Tabla de contenido

Publicidad

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
Power tools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with shar p cuttin g edges
are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
Battery tool use and care
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
with another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
Service
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
English (Original instructions)
2
Drill safety warnings
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring. cutting accessory contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric
shock.
Additional safety and working
instructions
Before any work on the machine (e.g., maintenance,
tool change, etc.) as well as during transport and
storage, set the rotational direction switch to the
centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
The battery is supplied partially charged. To ensure
full battery capacity, completely charge the battery in
Read the operating instructions of the battery
charger.
Apply the power tool to the screw/nut only when it is
switched off. Rotating tool inserts can slip off.
When working with an application tool, pay attention
that the application tool is firmly seated on the
tool holder. When the application tool is not firmly
connected with the tool holder, it can come loose
again and not be controlled.
The torque depends on the impact duration. The
maximum achieved torque results from the sum of
all individual torques achieved through impact.
Check the actually reached torque.
To save energy, only switch the power tool on when
using it.
Symbols
The following symbols are important for reading and
understanding the operating instructions. Please take
note of the symbols and their meanings. The correct
interpretation of the symbols will help you to use the
machine in a better and safer manner.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3700507a

Tabla de contenido