How To Disassemble - Sinbo SHB 3081 Instrucción Del Uso

TIPS AND WARNING
Choose PULSE function for pre-mixing is recommended before operation.
1800ML for one batch.
Make sure the blade base is installed properly before operation.
Measuring cup can be used to add ingredients during operation.

HOW TO DISASSEMBLE

1. Remove pusher. Turn cover counterclockwise, lift and remove.
2. Lift blade holder from driver.
3. Lift blade and remove from blade holder.
4. Turn bowl counterclockwise to unlock from motor base. Lift and remove.
CLEANING
Wash all parts except motor base in warm, soapy water. The discs can be disassembled
to wash with water, but be careful during disassembly.
DO NOT PUT ANY PARTS IN AN AUTOMATIC DISH-WASHER.
DO NOT IMMERSE MOTOR BASE IN WATER.
TROUBLESHOOTING
Machine does not work.
Ensure correct assembly.
Make sure power plug is plugged in properly.
Check if the mains have tripped, or if there is a power outage.
Machine stops running suddenly.
Processing bowl may loosen during vigorous processing. Please re-install the bowl cover.
Motor is running, while components do not run.
Make sure the Driver is installed correctly.
-13 -