Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
• Carefully inspect the new toilet for damage.
• If the existing toilet does not have a supply
shut-off valve below the tank, install one
before installing the new toilet.
To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms to local
codes.
TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
REMOVE OLD TOILET
Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line.
sewer gases.
NOTE: Mounting surface must be clean and level before new toilet is installed!
A
H
C
B
BEFORE YOU BEGIN
CAUTION: PRODUCT IS FRAGILE.
TOOLS AND MATERIALS NEEDED
F
E
G
D
I
CAUTION
Risk of personal injury or
product damage.
Handle with care. Vitreous china can break
or chip if the product is handled carelessly.
A: Screwdriver
B: Wrench
C: Tape measure
D: Level
E: Drill
F: Flange
G: Wax seal
H: Marker
I: Flexible Supply Lines
Publicidad
Tabla de contenido
