Before You Begin - Mirabelle Galatia MIRGA241 Instrucciones De Instalación

• Carefully inspect the new toilet for damage.
• If the existing toilet does not have a supply
shut-off valve below the tank, install one
before installing the new toilet.
To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms to local
codes.
TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly defi ne contour of china and components.
REMOVE OLD TOILET
a. Close toilet supply valve and fl ush tank completely.
Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line.
NOTE: If replacing valve, fi rst shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug fl oor waste opening to prevent escaping
sewer gases.
d. Remove closet bolts from fl ange and clean away old wax, putty, etc. from base area.
NOTE: Mounting surface must be clean and level before new toilet is installed!
RECOMMENDED TOOLS AND MATERIALS

BEFORE YOU BEGIN

Handle with care. Vitreous china can break
or chip if the product is handled carelessly.
CAUTION: PRODUCT IS FRAGILE.
1
CAUTION
Risk of personal injury or
product damage.