Tecnoinox GD4FG7 Manual Del Usuario página 14

Part 4
Cleaning operations must only be carried out once the
appliance has cooled.
In order to clean the appliance, disassemble it as per the steps
shown in fig."14" - "18".
Keeping the appliance clean is very important for a long and
trouble-free working life. The removable parts should be washed
separately with warm water and detergent, then rinsed using
running water. Do not use harsh or abrasive detergents to clean the
stainless steel parts. Iron scouring pads should not be used as they
The appliance does not require any specific maintenance besides normal cleaning; we do however suggest having it checked once a year
by the assistance centres. For this purpose a maintenance contract should be stipulated.
REMEMBER THAT THE APPLIANCE
 Must never be left unattended when in use!
 When the appliance is switched on, its surfaces become very
hot, so please take great care!
 The appliance is intended for professional use and therefore
only qualified personnel should use it!
 Installation as well as any conversion or adaptation operations
to a different gas type must be carried out in accordance with
current laws and only by qualified and authorized personnel.
Our appliances are studied and perfected using lab tests, in order to
provide high performance and yields. However, to keep energy
consumption low (electricity, gas and water), we suggest not using the
appliance for extended time periods if it is empty or in conditions that
compromise optimum yield. All packaging materials are environment-
friendly. They can be kept without posing any safety risks or they can be
burnt in a waste incinerator plant.
The plastic components that can be recycled are:
 Polyethylene: external packaging material and/or bubble wrap.
 Polypropylene: straps.
 Polystyrene foam: corner pieces, protective sheets and blocks.
Cleaning and care of the appliance
cause the formation of rust. For the same reason, avoid contact with
ferrous materials.
When cleaning, avoid using abrasive paper or cloth; instead and only
in special cases you can use pumice stone powder; we recommend
using sponges (ex. Scotch) to remove stubborn deposits. You can
also use oven and grill cleaning sprays, readily available on the
market, to remove stubborn deposits.
If spray products are used, follow the manufacturer's instructions.
To minimise the emission of polluting substances into the
environment, we suggest cleaning the appliance with products that
are at least 90% biodegradable.
Maintenance
Safety precautions
 At least once a year, have the appliance checked by qualified
personnel.
 All the parts that come into contact with oil or fat during use,
should be cleaned regularly as indicated in the chapter
"Cleaning and Care"
Ecology and environment
At the end of the appliance's working life, dispose of it properly.
Each appliance is made of 90% plus metal (stainless steel, iron,
aluminium sheet metal, etc.) hence it can be recycled by the relative
recycling organisations in compliance with the standards in force in
your country.
GB / IE - 4
In the instance of a fire, immediately close the shut-off
cock to cut off the gas supply, then use a suitable fire
extinguisher to fight the fire.
Prepare the appliance for disposal, so it is no longer
functional, by removing the power cable.
Maintenance and cleaning