Usb Operation; Sleep Function - Medion 81919 Manual Del Usuario

USB operation

AUX/USB/SD
1. Press the
2. Insert the USB memory stick into the USB socket. This is located on the right side
of the device.
tracks are displayed.
NOTE
If no USB stick was inserted the message
3. The buttons for USB operation have the same functions and can be used as in the
chapter on MP3 operation.
4. In order to remove the USB press the

SLEEP function

The device can remain operational for a preset time and then it switches itself off
automatically.
1. To activate the SLEEP function press the
SLEEP-90
2. Press the button again to select a shorter switching time. Here the switch off time
changes from 90 to 10 minutes in steps of ten.
90 • 80 • 70 • 60 • 50 • 40 • 30 • 20 • 10
3. When the screen shows the desired switching time (e.g.
SLEEP
button. The device will now switch off after the preset minutes.
4. In order deactivate the function ahead of time, press the
SLEEP-OFF
and
18
button until
USB
is shown on the screen and the total number of directories and
.
will appear on the screen.
USB
appears on the screen.
NO DEV
is displayed.
STOP
button and remove it.
SLEEP
button. The display reads
SLEEP-40
) release the
SLEEP
button again
USB operation