Sony SCPH-10281 Manual De Instrucciones página 33

3
Plug the telephone cord into a telephone wall jack.*
* Do not connect any type of cord other than a home-use
phone cord to the LINE connector.
If you connect a telephone cord or network cable of a type
other than that specified to the line connector, too much
electrical current may pass through the connector, causing a
malfunction, excessive heat or fire in the connector. Never
connect a phone jack of any of the following types (especially
PBX or ISDN) to the line connector:
• Any ISDN (digital) compatible phone or data line
• PBX phone lines
• Cellular phone or car phone
• Any IP-based home or business telephone network
Telephone wall jacks
The network adaptor can be connected to telephone
cords with standard RJ-11C telephone connectors. In
some cases you may need to use an adaptor to connect
to your phone line. For details, contact your local
telephone company.
Caution
• When you connect to a network you may be charged a
connection fee by the local telephone company and a usage
fee by the Internet service provider. In some cases, usage
charges may be more than anticipated. For details, refer to
the instructions provided with the software or contact your
Internet service provider.
• If you have call waiting, you may be disconnected or the
software may function abnormally if a call is received while
you are connected to a network.
US
33