Guarantee And Spare Parts - PANCONTROL PAN ADP400A Manual

Attention: Remove test leads from any power source and turn the device OFF
before opening the cover!
1.
Remove the protective cover and the screws of the battery or fuse
compartment using a proper screwdriver and remove the lid.
2.
Replace the battery. Mind the correct polarity.
3.
Replace the battery compartment lid and secure the screw.
4.
Disposal of the flat battery should meet environmental standards.
5.
Remove the battery if the device is not used for a long time.
Cleaning
If the instrument is dirty after daily usage, it is advised to clean it by using a humid
cloth and a mild household detergent. Prior to cleaning, ensure that instrument is
switched off and disconnected from external voltage supply and any other
instruments connected. Never use acid detergents or dissolvent for cleaning.

8. Guarantee and Spare Parts

PANCONTROL instruments are subject to strict quality control. However, should
the instrument function improperly during daily use, your are protected by a 24
months warranty from the date of purchase (valid only with invoice).
Only trained technicians may carry out repairs to this device. In case of spare part
requirement or in case of queries or problems, please get in touch with your
vendor or:
EN 8