Commissioning/Start-Up; Operating Status Display; Installing The Oase "Fm-Master" App - Oase FM-Master WLAN Instrucciones De Uso

6

Commissioning/start-up

The units are operated via the "FM-Master" app on your smartphone/tablet. Proceed as follows for starting up:
1. Install the "FM-Masterʺ app. (→ Installing the OASE "FM-Master" app)
2. Connect the InScenio FM-Master WLAN to the power supply.
3. Establish the WLAN connection.
The smartphone/tablet can be connected to the InScenio FM-Master WLAN in two ways:
• Smartphone/tablet and InScenio FM-Master WLAN are connected via an available WLAN rou-
ter.(→ Establishing a connection to the WLAN router (router/cloud mode))
• Smartphone/tablet and InScenio FM-Master WLAN are directly connected via WLAN.(→ Establishing a direct
WLAN connection (access point mode))
N O T E
The LED on the InScenio FM-Master WLAN indicates the current operating status.
6.1

Operating status display

 A
The LED indicates the operating status of the InScenio FM-Master WLAN.
• Help in the event of malfunctions or incorrect behaviour of the unit: (→ Malfunction table)
LED colour LED status
– Off
Green Lit
Flashing fast
Flashing slowly (2 seconds on,
1 second off)
Yellow Lit
Flashing fast
Flashing slowly (2 seconds on,
1 second off)
Red Flashing
6.2

Installing the OASE "FM-Master" app

iOS Android
Description
InScenio FM-Master WLAN is switched off.
InScenio FM-Master WLAN is ready for operation and in access point mode.
WPS is activated, InScenio FM-Master WLAN is waiting for the router access data.
InScenio FM-Master WLAN is ready for operation and connected to the router.
InScenio FM-Master WLAN is starting up or is in update mode.
Firmware update in progress
InScenio FM-Master WLAN is searching for a connection to the router.
Malfunction
Remedy:
• Disconnect from the power supply. Wait for 10 seconds then reconnect.
• Reset the InScenio FM-Master WLAN to the factory default settings (→ Restoring the factory
default settings)
• Carry out a Firmware_Update (→ Updating the firmware)
How to proceed:
1. Open Google Play or App Store.
2. Search for the ʺOASE FM-Master WLANʺ app and install.
– Follow the instructions during installation.
3. Confirm the query "access to internal data of the unit".
– If access is permitted, individual product photos for identification of the sockets
can be created.
– The query appears during installation (Android) or when executing the app
((iOS).
The app appears on the display after successful installation.
- EN -
51