Activating The Cloud Connection - Oase FM-Master WLAN Instrucciones De Uso

- EN -
7.4.5

Activating the cloud connection

"Settings" screen
EGC devices connected to the InScenio FM-Master WLAN EGC can be controlled from anywhere via the
OASE web portal. For this the InScenio FM-Master WLAN EGC has to be connected to the OASE cloud and
then added to the web portal. The device series number and device password are required for adding the
InScenio FM-Master WLAN EGC in the web portal.
Prerequisite:
Connection to the OASE cloud is only possible with the InScenio FM-Master WLAN EGC and in router/cloud
mode.
(→ Establishing a connection to the WLAN router via WPS (router/cloud mode))
(→ Manually establishing a connection to the WLAN router (router/cloud mode))
How to proceed:
1. Touch under Cloud to active the cloud connection.
– A dialogue field showing the device series number will open. Note down the device series number. You
need it for adding the InScenio FM-Master WLAN EGC in the web portal.
On your computer or smartphone/tablet
2. Enter the address
3. Log into the web portal.
– For the login it is necessary to register once beforehand.
4. Add the InScenio FM-Master WLAN EGC in the web portal.
– For this you require the device series number (displayed when the cloud connection is activated).
– The device password is required (defined during commissioning/start-up). The device password can be
changed. (→ Changing the device password)
In the "FM Master" app
5. Check the connection status in the menu "Settings" under "Cloud".
– InScenio FM-Master WLAN EGC is connected to the OASE cloud.
– InScenio FM-Master WLAN EGC is not connected to the OASE cloud.
– It may take several minutes to establish a connection, depending on the internet connection.
76
https://egccloud.oase-livingwater.com in the web browser to call up the OASE web portal.