ENGLISH
•
Using a small screwdriver, pry both side covers from the body.
•
Remove 4 screws located on the front of shaver along the outside edge.
•
Using a small screwdriver, pry up the newly unsecured front inner housing.
•
Remove 3 screws that were newly exposed on front.
•
Using a small screwdriver, pry up the newly unsecured inner back housing to expose the
battery.
•
Pry the battery free from the circuit board.
•
Dispose of the battery properly.
RECYCLING
W
8
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.