Tabla De Contenido - Hach TU5300 sc Manual Básico Del Usuario

Table of contents
Specifications on page 3
General information on page 4
Installation on page 10
User navigation on page 20
Operation on page 20
Additional information
An expanded user manual is available on the manufacturer's website. Videos on how to install,
operate and do maintenance and troubleshooting on the TU5300 sc and the TU5400 sc turbidimeters
are available on the TU5 Series Turbidimeters playlist at
http://www.youtube.com/user/hachcompany.
Specifications
Specifications are subject to change without notice.
Specification
Measurement method
Primary compliance
method
Enclosure
Dimensions (W x D x H)
Weight
Power requirements
Protection class
Pollution degree
Installation category
Mounting
Operating temperature
Storage temperature
Humidity
Sensor cable length
Laser
Optical light source
Fittings
Tubing requirements
1
Extension cables are available. The maximum sensor cable length is 50 m (164 ft) when no
accessories are connected to the instrument.
Details
Nephelometry with scattered light collected at a 90-degree angle to the incident light
and 360 degrees around the sample vial
DIN EN ISO 7027
Material: ASA Luran S 777K / RAL7000, TPE RESIN Elastocon
Thermoplastic Elastomer TPS-SEBS (60 Shore) and stainless steel
268 x 249 x 190 mm (10.6 x 9.8 x 7.5 in.)
Instrument with the process head: 2.7 kg (6.0 lb); Instrument with the optional
automatic cleaning module: 5.0 kg (11.0 lb)
12 VDC, 14 VA supplied by the SC controller
III
2
II
Indoor on a wall
0 to 50 °C (32 to 122 °F)
-40 to 60 °C (-40 to 140 °F)
5 to 95% relative humidity, non-condensing
1
1.6 m (5.25 ft)
Class 1 laser product: Contains a non user-serviceable class 1 laser.
850 nm, maximum 0.55 mW
Sample inlet and outlet: ¼-in. OD tubing
Polyethylene, polyamide or polyurethane tubing. Calibrated ¼ in. OD,
+0.03 or -0.1 mm (+0.001 or -0.004 in.)
Calibration on page 21
Verification on page 21
Maintenance on page 21
Troubleshooting on page 27
®
STK40,
English 3