Casals CPBLI20K2 Manual Del Usuario página 8

Electronic speed control: (Fig A)
- The speed of the appliance can be regulated
according to the pressure exerted on the on/
off switch (7). This function is very useful, as
it makes it possible to adapt the speed of the
appliance to the type of work that needs to be
done.
- If the appliance works continuously at low
speed, working life of the appliance will be re-
duced considerably.
Mechanical Speed change (Fig C)
1st speed: Move backwards the selector (12)
2ond speed: Move forwards the selector (12)
- The appliance should not be in use when
changing the speed
Select the function (Fig A, C)
Driving
- Turn the selector (10) until the arrow on the
appliance points to (
- Turn the selector (2) from (1) to (16) until the
desired result is obtained.
Drilling
- Turn the selector (10) until the arrow on the
appliance points to ( ).
Drilling with Impact Function
- Turn the selector (10) until the arrow on the
appliance points to ( ).
Use:
- Select the appliance function desired. (2)
- Turn the appliance on, by using the on/off but-
ton (7)
Once you have finished using the appliance:
- Stop the appliance by releasing the on/off
switch.
- Remove the battery from the appliance if you
8
).
are not intending to use the appliance during an
extended period.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains and
allow it to cool before undertaking any clean-
ing task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQ-
UID.
- Clean the equipment with a damp cloth with
a few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or
any other liquid or place it under running water.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and in-
exorably affect the duration of the appliance's
useful life and could become unsafe to use.
Supplies
- Always use original supplies, designed spe-
cifically for your appliance model.
- These supplies are available in specialist
shops.
Anomalies and repair
- Take the appliance to an authorised technical
support service if a product damage or other
problems arise. Do not try to dismantle or
repair without assistance, as this may be
dangerous.