Nuisance Channel Delete; Customer Programming Software (Cps) - Motorola Solutions XT420 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 176

Nuisance Channel Delete

Nuisance Channel Delete allows you to
temporarily remove channels from the Scan
List. This feature is useful when irrelevant
conversations on a 'nuisance' channel ties up
the radio's scanning feature.
To delete a channel from the Scan List:
Start Scan mode by short pressing the SB1 or
SB2 (programmed for scan) button.
Wait until the radio stops receiving at the channel
you wish to eliminate. Long press the SB2 button
to delete it. You cannot delete the channel with
scan enabled (home channel).
The channel will not be scanned again until you
exit the Scan mode by short pressing the SB1 or
SB2 (programmed for scan) button again or by
turning OFF the radio and back ON.
32
English
CUSTOMER PROGRAMMING SOFTWARE
(CPS)
Radio to be
programmed
CPS Programming Cable
Drop-In Tray Charger Tray
Figure 1:
Setting up the radio to the CPS
The easiest way to program or change features
in your radio is by using the Customer
Programming Software (CPS) and the CPS
Programming Cable(*). CPS Software is
available for free as web based downloadable
software at:
www.motorolasolutions.com
USB Ports

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido