Sauder Office Port 408293 Manual De Usuario página 24

Step 20
Fasten the LOCK PACK (FF) to the UPPER DRAWER
å
FRONT (G2) in the order shown. The CAM should swing
upward when locked.
NOTE: When the UPPER DRAWER is locked, the CAM
å
should be positioned into the groove in the TOP (C). If
the CAM does not fi t properly, you may need to slightly
bend the CAM.
Turn the key
clockwise to lock
the drawer.
Page 24
The prongs must press
into the DRAWER FRONT
as you tighten the NUT
with the adjustable wrench.
Washer
408293
Almost time to
celebrate! With a nap.
The end of the CAM must be
closer to the DRAWER FRONT
then the other end of the CAM.
Screw
Cam
Nut
www.sauder.com/services