Cleaning Your Mask - ResMed AirFit P10 Manual Del Usuario

Reassembly
1. With the gray side of the headgear facing out, thread the arms of the
mask frame into the buttonholes of the headgear. Secure the
headgear by pulling it over the edge of the frame closest to the nasal
pillows. Holding the mask frame, stretch the headgear lightly to
ensure it is securely attached.
2. Attach the pillows to the mask frame by inserting the top and bottom
clips into the correct slots.
3. Ensure the inner walls of the nasal pillows are not compressed or
collapsed. If required, a light squeeze can return each nasal pillow to
the correct shape.
4. Connect the AirMini tubing to the vent module by pushing the ends
together and twisting until it locks in place.
5. To add optional humidification, inset the HumidX/HumidX Plus into the
vent module. Connect the mask tube to the vent module by pushing
the ends together and twisting until it locks in place.

Cleaning your mask

Follow the cleaning instructions in this guide to maintain performance and
safety of the mask.
WARNING
•
Regularly clean your mask and components to receive optimal
therapy and to prevent the growth of germs that can adversely
affect your health.
•
Do not iron the headgear as the material is heat sensitive and will
be damaged.
•
Regularly inspect the HumidX/HumidX Plus and follow the
cleaning and maintenance instructions to prevent the growth of
germs that can adversely affect your health.
•
Always follow cleaning instructions and use mild liquid detergent
for mask components and mild soap for headgear. Some cleaning
products may damage the mask, its parts and their function or
leave harmful residual vapors that could be inhaled if not rinsed
thoroughly.
English 5