Additional Safety Rules - Hilti SID 2-A Manual De Instrucciones

4.1.5 Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs.
en
Use of any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a
fire.
d) Under abusive conditions, liquid may be ejected from the battery,
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
4.1.6 Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.

4.2 Additional safety rules

4.2.1 Personal safety
a) Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
b) Modification of the machine or tampering with its parts is not
permissible.
c) Do not look directly into the light source (LEDs) integrated in the
cordless impact screwdriver and do not direct the light at other
people's faces. This presents a risk of dazzling or eye damage.
d) Improve the blood circulation in your fingers by relaxing your hands
and exercising your fingers during breaks between working.
e) Avoid touching rotating parts. Switch the power tool on only after
bringing it into position at the workpiece. Touching rotating parts,
especially rotating insert tools, may lead to injury.
f) Activate the safety lock (forward / reverse switch in the middle
position) before storing or transporting the power tool.
8
Printed: 12.11.2014 | Doc-Nr: PUB / 5206157 / 000 / 00