Hilti SID 2-A Manual De Instrucciones página 13

g) The appliance is not intended for use by debilitated persons who
have received no special training. Keep the appliance out of reach
of children.
h) Dust from materials, such as paint containing lead, some wood species,
concrete / masonry / stone containing silica, and minerals as well as
metal, may be harmful. Contact with or inhalation of the dust may cause
allergic reactions and/or respiratory or other diseases to the operator or
bystanders. Certain kinds of dust are classified as carcinogenic such
as oak and beech dust, especially in conjunction with additives for
wood conditioning (chromate, wood preservative). Material containing
asbestos must only be treated by specialists. Where the use of a dust-
extraction device is possible it shall be used. To achieve a high level
of dust collection, use a suitable dust extractor. When indicated
wear a respirator appropriate for the type of dust generated. Ensure
that the workplace is well ventilated. Follow national requirements
for the materials you want to work with.
Always hold the tool securely by the grip. Keep the grip dry, clean
i)
and free from oil and grease.
The user and any other persons in the vicinity must wear suitable
j)
eye protection, a hard hat, ear protection, protective gloves and
breathing protection while the tool is in use.
4.2.2 Careful use of the power tool
a) Secure the workpiece. Use clamps or a vice to secure the work-
piece. The workpiece is thus held more securely than by hand and both
hands remain free to operate the power tool.
b) Check that the insert tools used are compatible with the chuck
system and that they are secured in the chuck correctly.
c) Ensure fastener and attachment will withstand the level of torque
generated by the tool.
damage the fastener/attachment and possibly lead to personal injury.
4.2.3 Careful use of the cordless tool
a) Ensure the switch is in the off position before inserting battery pack.
Inserting the battery pack into power tools that have the switch on invites
accidents.
b) Do not expose batteries to high temperatures and keep them away
from fire. This presents a risk of explosion.
c) Do not disassemble, squash or incinerate batteries and do not
subject them to temperatures over 80°C (176°F). This presents a risk
of fire, explosion or injury through contact with caustic substances.
Printed: 12.11.2014 | Doc-Nr: PUB / 5206157 / 000 / 00
Excessive torque may overstress, strip or
en
9