Description - Hilti SID 2-A Manual De Instrucciones

Symbols
Return materials for Direct current Rated speed under Forward rotation en
recycling no load
Reverse rotation
Location of identification data on the power tool
The type designation can be found on the type identification plate and the
serial number on the side of the motor housing. Make a note of this data in
your operating instructions and always refer to it when making an enquiry to
your Hilti representative or service department.
Type:
Generation: 01
Serial no.:

2 Description

2.1 Use of the product as directed
The SID 2-A is a hand-held cordless impact screwdriver. It is designed for
driving and removing screws in wood, metal, masonry and concrete and for
tightening and releasing nuts and bolts.
Do not use the battery as a power source for other unspecified appliances.
To help avoid the risk of injury, use genuine Hilti accessories and tools.
Do not use the cordless impact screwdriver for applications that require a
precise torque. If the cordless impact screwdriver is used for applications
that require a precise torque, or for applications where a specific maximum
torque must not be exceeded, there is a risk of over-tightening and damage
to the screw or workpiece. To prevent over-tightening in these types of
application, use a tool that allows specific pre-set torque settings to be
made.
The power tool is designed for professional use and may be operated,
serviced and maintained only by trained, authorized personnel. This
3
Printed: 12.11.2014 | Doc-Nr: PUB / 5206157 / 000 / 00