General Control - Sharp XL-UH240W Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

General control

ON/
STAND-BY
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Illumination light control
When the power is turned on, ring around the volume control light
up. To turn on/off the light, hold down the CLEAR/DIMMER button
on the remote control for more than 2 seconds.
Speaker light up control
The speaker will light up according to the level of the music source
played back. To turn on/off the light, hold down the CLEAR/DIMMER
button on the remote control for 2 seconds or more.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
button on the remote control.
Equaliser
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
FLAT
No equalisation.
ROCK
For rock music.
CLASSIC
For classical music.
POPS
For pop music.
VOCAL
Vocals are enhanced.
JAZZ
For jazz.
XL-UH240W_8-16.fm
XL-UH240W
ENGLISH
0 .....
30 MAXIMUM
E-12

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido