Cable Connections - Conceptronic Grab'n'GO CHD3UL Guía De Instalación Rápida

ENGLISH
d. Use the notches on both sides of the tray to fasten the hard disk.
e. Slide back the tray in the housing, attach the back plate to the backside of the
tray and use the 2 screws to fasten the back plate.

3.2 Cable connections

a. Connect the power supply to the power outlet and to the hard disk.
b. Connect the USB cable to the CHD3UL and to a free USB port on your computer.
c. Use the power switch on the back of the CHD3UL to turn on the device. The
Conceptronic Logo on the front of the CHD3UL will light up blue.
Windows 2000 & XP Automatically will recognize the hard disk. No driver installation is
required to operate the CHD3UL.
4. Safely removing the Harddiskbox
The device must be deactivated before disconnecting the device otherwise data could be
lost. You can deactivate "USB Mass Storage Device" by double clicking the icon in the
taskbar.
"Remove or eject hardware components" appears on the screen after double clicking.
Activate the appropriate USB component here and confirm with "Deactivate". A warning
appears if you do not deactivate the device before disconnecting.
D
8