dirna Bergstrom bycool FLAT ACTROS 2011 Instrucciones De Montaje página 30

FLAT
ES
EN
OPERATIONS TO BE CARRIED OUT TO
ASSEMBLE WATER TANK:
Position tank support on lower part of rear
20
cabin area, where it is most adequate.
Mark and drill cabin at Ø 9, taking into account
21
vertical position of support. Minimum of 6 holes
to fasten.
Place M6 riveting nuts and fasten support
22
using 6/100x30 screws
(*)- in case it does not rest on smooth part,
place 10mm.separator and 6/100x40.
22
21
Rivet nut
30
Allen screw 6/100x30
Grower washer Ø 6
Flat washer Ø 6
Supports
Tank
6/100x30
Grower washer Ø 6
Flat washer Ø 8
Support
Rear part cab
6/100x40 (*)
10 mm separator (*)
Rear part cab (*)
®