Overview; Operation; After Using The Appliance - Bosch ErgoMixx MFQ363 Serie Manual De Instrucciones

Overview

X Fig. A
1 Base unit
2 Power cord
3 Cord clamp
4 Handle
5 5-level switch + instantaneous
switching
(depending on the model)
For switching the appliance on and off
and adjusting the operating speed.
P = switched off
1 = lowest speed
5 = highest speed
M = instantaneous switching (highest
speed)
Push switch to left and hold
6 Ejector button
For removing the tools
7 Apertures for inserting the tools
8 Stand with cord tidy
For setting the appliance down when
not in use and for winding up the power
cord
Tools
9 Stirring whisk
10 Kneading hook
Special accessory
11 Universal cutter
(separate instruction manual)
If the universal cutter is not included, it can
be ordered from customer service (order
no. 659057).

Operation

Base unit with tools
An especially good result is achieved if the
tools are used for the following applications:
Stirrers
for Sauces, beaten egg white, mashed
potatoes, crème fraîche, mayonnaise,
cream and light dough, e.g. cake mixture.
Stirrers are not suitable for processing
heavy dough.
Kneading hook
for stiff mixtures such as short pastry, yeast
dough and potato dough as well as for
mixing heavy mincemeat dough, pasta or
bread dough.
The maximum processing quantity is
500 g of flour and ingredients.
W Risk of injury from rotating drive!
Never grip the rotating tools. Do not attach
or remove tools until the appliance is at a
standstill – when switched off, the appliance
continues running briefly.
Protect long hair or loose items of clothing
to prevent them from becoming caught in
the rotating tools.
■ Before using the appliance for the first
time, clean base unit and tools.
X Fig. B
■ Completely unwind the power cord.
■ Place the required tool on the base unit
and depress until it locks into position.
Note the shape of the plastic
parts to prevent mixing them up
(see Fig. B-1)!
■ Insert the mains plug.
■ Place the food in a suitable receptacle.
■ Insert tools into the receptacle and
switch on the appliance at the required
setting.
Settings 1, 2:
for working in and mixing in.
Settings 3, 4, 5:
for kneading and beating.
■ Instantaneous switching M:
for mixing or beating ingredients quickly.

After using the appliance

■ Move the switch to P.
■ Disconnect the mains plug.
■ Release the tools by pressing the
ejector button and remove.
Warning:
Do not press the ejector button until the
tools are at a standstill. The ejector button
cannot be actuated unless the switch is in
the P position.
Overview en
13