Cleaning And Maintenance - Imetec G0002 Manual Del Usuario

Ocultar thumbs Ver también para G0002:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
wArNING! Always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
wArNING! Do NoT wash the appliance.
Do NoT use the appliance if damp.
CLEANING THE INNEr LINING (1)
The footwarmer is provided with an inner lining (1) which can be washed in lukewarm water
(40°) after it has been pulled out of the outer lining (2). We recommend using delicate
detergent.
mACHINE wASHING
The lining can be machine washed at a maximum of 40°C with a delicate cycle.
Use the gentle spin cycle only. DO NOT run an additional spin cycle.
TUmBLE DrYING
Tumble dry at a moderate temperature.
Remove the lining from the tumble dryer at the end of the drying cycle and hang it out
to dry completely.
Do not use the lining before it is completely dry.
When not in use, store as follows:
when storing the appliance, allow it to cool down before folding.
wArNING!
on top of it during storage.
wArNING! once you have finished using this appliance, make
sure it has cooled down completely before putting it away.
Examine the appliance and its supply cord frequently for signs of wear or
damage. lf there are such signs or in the case of malfunction, contact an
authorised technical service centre.
The product is packaged in recyclable materials. Dispose of packaging in accordance
with the environmental protection standards.

CLEANING AND mAINTENANCE

STorAGE
Do NoT crease the appliance by placing items
DISPoSAL
EN
11

Publicidad

Tabla de contenido
loading

Tabla de contenido