Switching The Appliance On And Selecting The Temperature; Automatic Shutdown; Switch-Off; Cleaning And Maintenance - Imetec E0809 Instrucciones De Uso

Ocultar thumbs Ver también para E0809:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13

SWITCHING THE APPLIANCE ON AND SELECTING THE TEMPERATURE

• Press the ON/OFF
• The display (1) will light up and the temperature will be automatically set to position 5.
• Select the desired temperature (from 1 to 5) by pressing the temperature selector
relative number lights up on the temperature display (1).
• The sand reaches the optimal level of heat after approximately 20'.
• The best way to exploit the sand heat is to use the product from the sand side combined to the
breathable mesh lining side.

AUTOMATIC SHUTDOWN

• The heating pad is provided with an automatic switch-off system. The stand-by display
lights up after 3 operating hours to indicate that the product has switched off automatically.
• Switch the appliance back on by pressing the ON/OFF selector (4) and select the desired
temperature once again.

SWITCH-OFF

• Switch the heating pad off by pressing the ON/OFF selector (4) when it is no longer used.
• Remove the plug from the socket.
The heating pad is washable. Refer to the washing symbols on the heating pad label for the washing
instructions.
LINING: the lining of the heating pad is machine washable.
Maximum washing temperature: 40 °C.
Tumble-dry at less than 40°C.
Do not dry-clean.
PANEL: The panel containing the sand must not be washed.
Do not wash

WASHING INSTRUCTIONS

Always disconnect the plug and the control socket (5) from the socket (6) before cleaning. slightly
push down the plug to remove it easily
MACHINE WASHING
• The heating pad can be machine washed at 30°C with a normal cycle.
• Only the gentle spin cycle is to be used. DO NOT set an additional spin cycle.
DRYING
• Set the dryer at a low temperature.
• Do not apply pegs on the electrical parts when hanging the heating pad to dry in order not to
damage them.
• DO NOT use the heating pad until it is completely dry.
(4) selector to switch the heating pad on.

CLEANING AND MAINTENANCE

Do not bleach.
Do not iron.
Do not dry in the dryer
EN
(3) until the
(2)
9

Publicidad

Tabla de contenido
loading

Tabla de contenido